Installing Litecoin Client and Mining Software in Ubuntu

An extensive guide to building your financial sovereignty on Ubuntu 18.04

Hello all,
I have written up an extensive guide on building a node box in Ubuntu 18.04. It's aimed at newcomers who wish to use Linux as an operating system or are thinking about making the switch from Windows to Linux.
It covers the basics of installing, configuring, running and maintaining software related to bitcoin. I add my own commentary to elaborate key points.
It is not aimed to be a 'quick and easy' guide. It's more about learning the process and understanding, something I believe is key to financial sovereignty. Everything is configured manually, no scripts, no dockers, no complex terminal commands that you will find difficult to understand.
My intention is to provide you with the basic skills to get you up and running into the world of bitcoin/lightning network using Ubuntu and from there you can explore what else it has to offer. I aim to make other guides in future as well. I'm thinking guides on Blockstream Satellite, maybe HoneyMiner, and making a fully stacked torrent box/media server.
I will say that by no means am I an expert in all things linux/ubuntu. These are just learnings from my own exploration. For feedback, you can hit me up on twitter (@k3tan88) or leave an issue on the GitHub.
https://github.com/k3tan25/ubuntu-node-box
submitted by k3tan to Bitcoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

DECENT MINING SETUP & RESSOURCES SHORTCUT

To all DECENTants,
I would like to encourage you to become a seeder or witness (actually not miner) on DECENT.

SHORT INTRODUCTION ABOUT ME

As a pioneer with Bitcoin I truly believed in the DCT project and it's proposal. The first day of the ICO release I sent all my BTC balance to the DECENT. Not knowing when and what they will deliver. To participate in this great adventure means a lot to me. Another project from my home country I strongly encourage you to get familiar with is Ethereum. I have been an early CPU miner: before Crypto Currency I used to compute for sience projects grid for Clean Water and Cancer Research. If I hadn't bought Rainforest with the Ripple they distributed to all contributors, I'd be a rich man today. :P

DECENT SUPPORT

https://decent.ladesk.com/

DECENT WIKI

https://wiki.decent.ch/doku.php?id=decent:howto#build_decent_from_source

DECENT GITHUB

https://github.com/DECENTfoundation/DECENT-Network

BLOCK EXPLORER

https://explorer.decent.ch/

DECENT DB

https://decent-db.com/

GRAPHENE CLI Wallet Cookbook

https://github.com/bitshares/bitshares-core/wiki/CLI-Wallet-Cookbook

RESSOURCES

https://www.digitalocean.com/community/tutorials/initial-server-setup-with-ubuntu-16-04
http://www.hamvocke.com/blog/a-quick-and-easy-guide-to-tmux/
https://digitizor.com/create-swap-file-ubuntu-linux/

I - SERVER SETUP

A dedicated server with Linux Ubuntu 16.04 LTS is most recommend for 24/7 operation. I suggest you close the root and create a new user with SSH Key, secure the system with a firewall.

1. Create a new user

adduser bob 

2. Elevate him

usermod -aG sudo bob 

3. Generate a new keyset

ssh-keygen 

4- Bind the new keys

ssh-copy-id [email protected]_server_ip 
Copy the keys to your local drive. You'll need them to connect.

5. Change the config file

sudo nano /etc/ssh/sshd_config 
Change Line PasswordAuthentication no

6. Finish with

sudo systemctl reload sshd 

7. Login with your ssh key, user and password

ssh [email protected]_server_ip 

II - PREREQUISITES

1. Grab your tools

sudo apt-get update sudo apt-get install build-essential autotools-dev automake autoconf libtool make cmake checkinstall realpath gcc g++ flex bison doxygen gettext git qt5-default libqt5svg5-dev libreadline-dev libcrypto++-dev libgmp-dev libdb-dev libdb++-dev libssl-dev libncurses5-dev libboost-all-dev libcurl4-openssl-dev python-dev libicu-dev libbz2-dev 

2. Download and build Boost 1.60.0

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-third-party cd ~/dev/DECENTfoundation/DECENT-Network-third-party rm -rf boost_1_60_0* boost-1.60.0* wget https://sourceforge.net/projects/boost/files/boost/1.60.0/boost_1_60_0.tar.gz tar xvf boost_1_60_0.tar.gz mkdir boost-1.60.0_prefix cd boost_1_60_0 export BOOST_ROOT=$(realpath ../boost-1.60.0_prefix) ./bootstrap.sh --prefix=$BOOST_ROOT ./b2 install cd .. rm -rf boost_1_60_0 boost_1_60_0.tar.gz 

III - INSTALLATION

1. Clone the repo

mkdir -p ~/dev/DECENTfoundation cd ~/dev/DECENTfoundation #via ssh $ git clone [email protected]:DECENTfoundation/DECENT-Network.git #via url $ git clone https://github.com/DECENTfoundation/DECENT-Network.git cd DECENT-Network git submodule update --init --recursive 

2. Build and install Decent

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-build cd ~/dev/DECENTfoundation/DECENT-Network-build cmake -G "Unix Makefiles" -D CMAKE_BUILD_TYPE=Debug ~/dev/DECENTfoundation/DECENT-Network cmake --build . --target all -- -j -l 3.0 cmake --build . --target install 

IV - USE DECENT

You don't want your server to shut down the process when you lose connection or quit.
I use tmux. Though nohup is sufficient for infrequent access. Use it when you fire up decentd after miner setup.
nohup ./decentd & disown 

1. RUN decentd - On first run decentd will create .decent in the home directory.

~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/decentd 
Always close it via Ctrl+C to save the current state Ctrl+S Freeze Ctrl+Q Resume

2. Get HELP

cd ~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/ ./decentd -h 

3. RUN cli_wallet

~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/cli_wallet 
Close it with Ctrl+D

4. USE cli_wallet

set_password xy unlock xy 

5. IMPORT your account

import_key decentgo_username your_private_key 

6. CREATE 3 sets of keys for your new account

suggest_brain_key 
write them down, don't use the ones below. ;)

1. new owner key

{ "brain_priv_key1": "UNBUSH ROAR CHKALIK STRUE PLATTEN DEMOB COLETIT DECAYER SPERONE SPASMED ANATASE LAGGARD BESPETE AXOID SERAL CHEKI", "wif_priv_key1": "5J4brX9bydADigEtsXZhCZ1YLVXkq8frp4xcKAREQ3Gh3P2DE7e", "pub_key1": "DCT5VNJni7HypYi159qiwazZ1WZUt4p2v7NLQmFCJPDvjBpW2oG8a" } 

2. new active key

{ "brain_priv_key2": "FUSION BLART JAIL FESTAL LAXNESS ROSTEL TITI VANADYL PUG BATATA KAIK ROSETY STUCCO TETE BEMUDDY WUDGE", "wif_priv_key2": "5HvsjRsokHSeeUdRkM88JgLzYJ6vnc2e35CzyZNRnmh1fvm91Jz", "pub_key2": "DCT7G7KeUnMPVKXN2y8M7BnyosLRE3LtSnNp7kbxtYd9xHiBoX6wd" } 

3. new public signing key

{ "brain_priv_key3": "DECESS LABBA PLAN DEHUSK FISTY MOSSER SPURTER SCORIAE INDART UNDYE MASTER STEIGH SAFROLE FLURR THAPSIA JOB", "wif_priv_key3": "5JgMsecySgt2BQsmmEE9QnwAGuudC9fGeZJhreyPatcu2TVY9bs", "pub_key3": "DCT6D7TLeVJmPQWR73XHvEhTVHzTDoG6oTSUyvfGa58nuc5wL96UH" } 

7. CREATE your new account

register_account new_username pub_key1 pub_key2 decentgo_username true 

8. SEND some DCT to your new account

transfer decentgo_username target_username 3.00 DCT "memo" true 

9. IMPORT the new account

import_key new_username wif_priv_key2 

10. Close the Wallet and edit the config.ini inside /root/.decent/data/decentd/

private-key = ["pub_key2","wif_priv_key2"] 

11. Launch again and create your miner

create_miner username "proposal URL" true 

12. Change your signing key to 3rd keypair from suggest_brain_key

update_miner username "proposal URL" public_key3 true 

13. Edit the config.ini again inside /root/.decent/data/decentd/

enable-stale-production = true miner-id = "1.4.X" private-key = ["pub_key3","wif_priv_key3"] 

Your Server is now ready to run a DECENT witness.

Be aware that you should not close your daemon at any time.

V - USEFUL COMMANDS

get_brain_key_info dump_private_keys get_private_key public-key get_account texxi get_miner texxi list_my_accounts list_account_balances texxi set_desired_miner_count username 99 

Now get some support for your miner and join the community!

https://decent-project.slack.com/

You can vote for me and I will gladly return the favor. Please make sure your server runs stable and you're not missing any blocks. Good Luck!

vote_for_miner username texxi true true

All voters will receive early preview access to my first cryptocurrency trading tool to be released in 2018. But remember: Always trade for good and invest in green.

submitted by Texxer to Decentplatform [link] [comments]

Zeus/Gaw ASIC Setup Guide for Linux/Raspberry Pi

So I recently I became quite interested in mining and cyptocurrencies in general. So interested in fact that I bit the bullet and decided to buy myself a GAW Fury.
I then spent some time doing research on how to set up a GAW or Zeus ASIC on Linux, in particular on a Raspberry Pi, and have found most guides to be awful. The reason they are so bad IMHO is that they assume quite a bit of prior knowledge, either with Linux or mining, and give very little instructions. So I have tried to put together a guide that requires very little prior knowledge.
It is my aim that anyone could get their shiny new asic up and mining in no time using this guide. Anyway, I present...

The Complete Noobs Guide to Setting Up a Zeus or Gaw ASIC on Debian/Ubuntu/Raspberry Pi

Resources

About Cyrptocurrencies and Their Jargon

If you are new to cryptocurrencies and how they work I suggest taking a look at this series of KhanAcademy videos. They are for Bitcoin but the theory is the same. I found them very helpful when it came to understanding what mining actually does and the mechanics of cyrptocurrencies.
Also take a look at sircamm22 his info found here, is great and breaks down a large number of concepts. I slightly disagree with no. 21 regarding preordering. Just exercise common sense.

Linux

If you are new to Linux you could follow along by simply typing in the commands. However I highly recommend taking the time to learn what you are doing. This course is a great place to start.

Computer Setup

By the end of this section you will have your device turned on, fully setup and connected to the internet with.
Note: Commands to be typed into the command line will be displayed like this:
echo Hello World

Desktop/Laptop

For laptops and desktops already running Ubuntu or Debian I will assume you have setup your internet setup as part of the installation.
If not: There are plenty of guides out there and the installation/setup process is very easy. A good place to start for Ubuntu is here.
Now open up a terminal window. Ctrl + alt + t on a standard Ubuntu installation.
If you plan on using this PC without a monitor I would suggest installing an SSH Server.
These commands will be discussed later on in the guide.
sudo apt-get -y install openssh-server
sudo service openssh-server start

Raspberry Pi

The Raspberry Pi Foundation has put together a great guide in PDF format.
Use NOOBS it will save you a lot of trouble. NB: Some SD cards don't support NOOBs but will work fine if the image is put on using a different method.
Here is a great guide for setting up the Raspberry Pi SD card from Elinux.org. In fact it's a great place to start for anything RPi related. Raspberry Pi hub at Elinux.
Once the SD card is setup you will need to insert it into the Raspberry Pi and boot. Install Raspbian from the NOOBs menu and wait.
Follow this guide by Adafruit for first time setup. You will need to enable SSH Server.
I suggest not starting the desktop on boot. It can be easily run from the command line by typing startx.
Follow this guide by Adafruit to setup your network. Found here. No need to do this if you set up previously in the first time config.
We will also at this point want to setup ssh. Again I will point you to an Adafruit guide.
Once done exit back to a standard command line interface. This can be done in LXDE by using the power off menu located in the bottom right corner.

Miner Setup

Installing BFGMiner

If you want to the Raspberry Pi or PC without a monitor go ahead and SSH into your device.
So now you should be staring at a command line interface whether on the device with a monitor or via SSH.
First things first lets make sure we are all up to date. This will update our package list from the repositories and upgrade them to the newest version. "-y" Will simply say yes to any prompts.
sudo apt-get update && sudo apt-get -y upgrade
We are going to need to install some useful tools. Git-core is how we will clone and download BFGMiner from GitHub and Screen allows multiple command line instances and means if we exit out of ssh session or quit Terminal on Ubuntu, BFGMiner will continue to run.
sudo apt-get install git-core screen
We also need to download some other tools/dependencies to ensure that BFGMiner will compile successfully.
sudo apt-get -y install build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin
Ok now change into your home directory.
cd ~
And clone BFGMiner by Darkwinde.
git clone https://github.com/Darkwinde/bfgminer.git
Once the download has completed move into the bfgminer directory.
cd bfgminer
The following steps may take a while.
Now run autogen.sh
sudo ./autogen.sh
You will need to make the configure script execuitable.
sudo chmod +x ./configure
Now configure bfgminer
sudo ./configure CFLAGS="-O3" --enable-scrypt
Now lets make!
sudo make
Install BFGMiner
sudo make install
One more thing...
sudo ldconfig

Running BFGMiner

If you haven't already plug in your ASIC.
Just confirm your system is recognising the ASIC.
lsusb
Its output should look similar to this (no need to type this in):
Bus 001 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Yep there it is our ASIC listed as device 005. There is no need to install any drivers, unlike in windows, as they come in the kernel.
Now lets actually start BFGMiner.
You will want to start a screen session to ensure BFGMiner doesn't quite when you exit.
"-S" is the option for starting a new screen session. You can replace "miner" with anything you like.
screen -S miner
Now you can run the commands below.
Here is a sample of what you should type. You will need to replace somethings with your own values.
sudo bfgminer --scrypt -o stratum+tcp://URL:PORT -u USERNAME -p PASSWORD --zeus-cc CHIPCOUNT --zeus-clk 328 -S zeus:/dev/ttyUSB0
Where:
URL:PORT is the address and port of the pool you wih to use. Now I won't suggest a pool. I will leave that decision up to you. If you do wish to mine DOGE take a look at this site for a list of pools and comparisons.
USERNAME this is the username you use on the pool. Every pool is different. Check your pool's website for details. PASSWORD same as above. Specific to your pool, not every pool requires one.
CHIPCOUNT this is specific to which ASIC you are using.
For GAWMiner ASIC's:
  • War Machine: 256
  • Falcon: 128
  • Black Widow: 64
  • Fury: 6
For ZeusMiner ASIC's:
  • Blizzard: 6
  • Cyclone: 96
  • Hurricane X2: 48
  • Hurricane X3: 64
  • Thunder X2: 96
  • Thunder X3: 128
Now to make sure you don't stop mining when you exit ssh or terminal. Press:
ctrl + a + d
To come back to the BFGMiner screen simply run:
screen -r miner
You're done!!

Start on Boot

First off you will want to make sure you have BFGMiner running correctly. Ensure you have the miners set up properly and your pool correctly configured.
Start a BFGMiner instance, detailed above.
Once the instance has started and you are happy with how everything is working press "s" on your keyboard to enter the settings menu.
Now press the "w" key. Don't press enter. We want to specify where our config will go. Type:
/home/USERNAME/bfgminer.conf
Substitute USERNAME for your user. On a standard RPI install its pi. On ubuntu it's what you set during the instillation.
Now press the enter key to return back to the main BFGMiner screen. Press "q" on your keyboard to exit BFGMiner. You should now be back in the command line.
Now we want to edit a file called rc.local. Any commands in this file will be executed on boot.
sudo nano /etc/rc.local
Depending on your system this file may already contain some commands. Be careful not to delete them.
After the last command and before "exit 0" type the following on one line:
sudo -u USERNAME screen -d -m sudo bfgminer --config /home/USERNAME/bfgminer.conf
Where USERNAME = your username
Hit ctrl + x then y to save and exit nano.
The above command will create a new screen session and run bfgminer using the config we created earlier. All while as our username so that we can easily reattach.
Lets reboot to ensure it is working correctly:
sudo reboot
Once rebooted and logged in, show all running screen sessions:
screen -ls
Reattach to the session. You only need to use the numbers before the first dot.
e.g Mine looks like: 2480..hostname (13/07/14 12:02:09) (Detached). So I type:
screen -r 2480
Verify everything worked as expected. Then ctrl + a + d to exit.
You have now setup BFGMiner to restart on reboot.

Power Failure

If you are using a Raspberry Pi and it loses power it will automatically reboot on receiving power again.
For standard desktop PCs there is an option in some BIOS/UEFI to turn the computer on when it receives power. Consult your motherboard's manual and manufacturer's website.

Sources

Here is where I got my info from.
And of course /dogemining

Wrap Up

Congrats you've done it. You have managed to successfully get your shiny new asic mining away.
I do plan to make another guide detailing how to setup and use StarMiner a ready to go RPi mining distro.
So I hope this is helpful for you guys. I have seen lots of posts asking the exact same questions again and again and I have tried to answer these as best I can. I am still learning about this stuff so if there is something I have missed or a mistake I have made please tell me.
Anyway good luck. And I'll see you at the moon.
Cheers Frogsiedoodle
Edit 1: Layout and formatting.
Edit 2: Added instructions for screen which I initially forgot.
Edit 3: Removed 1 unneeded dependency
Edit 4: Added section on start on reboot and power failure.
submitted by Frogsiedoodle to dogemining [link] [comments]

How To Mine Doge with Ubuntu 13.10. (Part 1, for AMD Graphics Cards)

I feel the community really needs a resource like this. Because if I had a Doge for every-time taught a newbie how to Mine on Ubuntu, I would be a very rich doge!
EDIT: Sorry if it looks funny, Reddit doesn't like the numbers I put in for some reason.
If you have Ubuntu you have likely not upgraded because you think you cant mine on 13.10, and while that has been true in the past, a few people have got it figured out. So feel free to upgrade. If you are not on Ubuntu, Seriously you should consider using it. Even if its just on an older desktop.
Alright, so lets get a few things clear, I am assuming that you just FRESHLY installed Ubuntu 13.10 x64 on your system. I am assuming that you have no drivers, and no miners. You will need at least a key board and a mouse. The guide will be done in several parts, this first part is for most AMD Graphics cards. If you have an Nvidia, or just want to mine with your CPU, please check back later for those guides!
When reading this guide, please remember that as I give you commands to type into the terminal, Anything between { and} must be included. Do not copy and paste the {}.
Lets get started, If you have not already done so, Install Ubuntu 13.10 64Bit From Here (http://www.ubuntu.com/index_asus.html)
*1. Lets start by making sure you are up to date. Open up the terminal and enter this:
{sudo apt-get update && sudo apt-get upgrade} 
Let that run for a bit.
*2. Once that has finished we are going to download some applications we will need:
{sudo apt-get install dh-make dh-modaliases execstack libxrandr2 libice6 libsm6 libfontconfig1 libxi6 libxcursor1 libgl1-mesa-glx libxinerama1 libqtgui4} 
*3. Once that has run its course we are going to install the ssh server. Remember this command is going to make your computer shut down. While it is shut down, carefully install your graphics cards. If you don't have any experience with this, I suggest you 3 minutes to watch this guide, because failure to install a graphics card the right way can destroy it.
(http://www.youtube.com/watch?v=O9x097QRXeA)
{sudo apt-get install openssh-server sudo shutdown now} 
*4.Install your Card(s) and turn the computer back on.
*5. Make a new folder called "AMD DRIVERS123" inside of your download folder. Downoad the following 3 things into that folder. (1. AMD Drivers: http://support.amd.com/en-us/download/incomplete) (2. AMD APP SDK: http://developer.amd.com/tools-and-sdks/heterogeneous-computing/amd-accelerated-parallel-processing-app-sdk/downloads/) (3. AMD ADL SDK:http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/)
*6. Ok, now we need to unzip and compile those drivers. So, open a terminal my right clicking inside of "AMD DRIVERS123". The enter this:
{unzip amd-catalyst*.zip chmod +x amd-catalyst*.run} {sudo ./amd-catalyst*.run --buildpkg Ubuntu/saucy} 
*7. Now we need to install the drivers. Enter the code exactly as you see it, don't worry, the first command will fail, we are expecting it too.
{sudo dpkg -i fglrx*.deb} {sudo apt-get -f install} {sudo dpkg -i fglrx*.deb} {sudo reboot} 
Your computer should now reboot.
(If this failed, you probibly need to remove the old drivers. Do this
{cd /etc/default sudo pico grub} 
Change the line:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset" 
Now save by pressing [CTRL+x]
{sudo update-grub} this will make the change perminent. {sudo reboot -n} Reboot with new settings. Once it starts back up try installing the new drivers again.) 
*8.GREAT! You are really on a roll! Now we need to update AtiConfig
{sudo aticonfig --initial --adapter=all} 
*9.Time to install the APP ADK:
{tar xvf AMD-APP-SDK*.tgz} {sudo ./Install-AMD-APP.sh} {sudo reboot} 
*10. WOOT! You are so close to diggin that sweet Doge!! Its time to download CGMiner. IMPORTANT NOTE! You need to get CGminer 3.7, IT IS THE ONLY ONE THAT WILL WORK. Do not get any older or newer, Just this. :
{sudo apt-get install git unzip git clone -b 3.7 https://github.com/ckolivas/cgminer} 
*11. Ok, now go back to "AMD DRIVERS123", Unzip AMD SDL SDK 6.0. Once you have it unzipped, go the file called "include", open it up, copy everything inside, then go find CGminer. Copy these files into the CGminer file called ADL_SDK.
*12. To install CGminer, we are going to need a few things. Get all of these.
{sudo apt-get install build-essential autoconf libtool libcurl4-openssl-dev libncurses5-dev pkg-config libudev-dev} 
*13. Lets go ahead and compile CGminer.
{cd cgminer} {./autogen.sh} 
*14. Ok, when you did that, it told you GPU was not supported, time to fix it.
{./configure --enable-opencl --enable-scrypt} 
(if you did it right you should now get this: OpenCL...............: FOUND. GPU mining support enabled scrypt...............: Enabled ADL..................: SDK found, GPU monitoring support enabled)
*15. If everything has been good so far then
{make} 
*16. MATHEMATICAL! Now lets get it set up to run a test.
{nano test.sh} {!/bin/bash export DISPLAY=:0 export GPU_MAX_ALLOC_PERCENT=100 export GPU_USE_SYNC_OBJECTS=1} {./cgminer -n} 
*17. Now save by hitting [Control+x][y][Enter]
*18.Lastly lets CHmod test.sh
{chmod+x test.sh} 
*19. TIME TO RUN THE TEXT!!!
{./test.sh} 
(If your output looks like this your ready to go!!! CL Platform 0 vendor: Advanced Micro Devices, Inc. CL Platform 0 name: AMD Accelerated Parallel Processing CL Platform 0 version: OpenCL 1.2 AMD-APP (1214.3) Platform 0 devices: 1 0 Tahiti GPU 0 AMD Radeon HD 7900 Series hardware monitoring enabled 1 GPU devices max detected)
*20. Excellent! Now we have it installed, its time to pick 2-3 pools, and get accounts set up at each of them. I currently use These 2, and If I find another I like I'll update. If you have a really awesome pool you would like me to include on the list, feel free to message me.
Pools: http://doge.cryptovalley.com/ (great community, server not super stable, but they have a chat. I hang out here a lot under the handle 'StrongBad' feel free to stop buy and ask questions)
https://dogehouse.org/ (Super stable pool, Great contests, super friendly, and they pay your miner a bonus if you find the block!)
Choose your pools, go to their sites and sign up. VERY IMPORTANT!!! Use different usernames and passwords for every mining site. If one site gets hacked, you don't want to give them a way to steal everything!!!!! Don't worry about the worker names and passwords being unique or complex tho, the most they can do with this is mine for you.
*21. Ok, now go to the CGminer folder, and open up a Terminal Window.
{sudo ./cgminer} 
This should start ./cgminer up with some really basic settings, and not pointed at any pool. Lets fix that: First press [p] to go to pool settings Now [A] and enter the information for the 1st pool. For instance if you are signing on for dogehouse: (Input server details: stratum+tcp://stratum.dogehouse.org:3333 Username: 'yourusername.workername password: 'yourpassword') If you got no errors, you did it right! Your miner should now connect and start to mine very slowly.
Now, do the same thing for all your other pools. the reason we do this is because Doge Coin pools are constantly being DDoS attacked, and this way your worker automatically switches over to a good pool if one go's down.
*22. time to save your current settings press [Enter] to get back out to the main menu, then [s] to bring up settings. Now press [W] to write a Config file. Name it DogeCoin.conf, and make sure to save it in the location it directs you too.
*23.OK! So, now we have everything set up to its basics. What you need to do now is sit down, and fine tune your Card(s). Its really early in the morning, and I need to get some sleep, I will add more on how to tune your card tomorrow in another post, and link it HERE:
Or, I will help you find the best configuration for your card(s). However as this is quite a bit of work, I do charge a small fee. Contact me with your card(s) information and I will get back to you right away. I generally let you decide how much to pay me.
This is my first ever guide on reddit! If you enjoyed it, or if it helped you please remember to upvote! I am going to start doing an educational YouTube series about Bitcoin, and will likely be doing a side program about Doge, if I find time and funding!! You can find that here: All tips are appreciated! DPTwcQreASwzt6TeWBWFb6Kz9ZU5Sezvr9 If you have any Questions, feel free to ask, I will get back to you ASAP.
Happy Digging everybody!
submitted by Sonofchange to Dogecoinmining [link] [comments]

Waggox Coin

Waggox Coin

https://preview.redd.it/2ep71q52rqr11.png?width=360&format=png&auto=webp&s=edfca70bde6de10ffca5a517d4be7a1e62c7c3e2
This protocol is predicated on the work of Evan Duffield (dash), (itself relies on Bitcoin, the work of Satoshi Nakamoto), elaborate with democratically-decided blockchain clear social contribution dead while not a central authority, to support the socially accountable decentralization of currency. Budgets for social contribution, usemerchant adoption, and usage incentivization, budget combining activities, development, and selling ar enclosed similarly as a three-system network and improved mining problem adjustment for higher distribution and growth, governance enhancements to push hyperbolic decentralization and democratic freedom and varied quantifiability and dealings speed enhancements.

A sophisticated cryptocurrency design in order to support market penetration and mainstream acceptance, Waggox give the better way out to centrally organized contributions, that is to make you your own bank. Because of the profitable nature of running a master node, owners of such are equivocally profitable, and in order to avoid dumping factor by the network with unnecessary master nodes or encouraging reckless master node operators, one condition must be fulfilled in order to become a master node owner–proof of ownership of a certain number of coins.

Waggox must not be in the master node itself, that means the proprietor can promote them each time, proof of possession is executed through keeping the cash in a positive way that makes them obvious to the entire network. And so, the variety of cash wished for a master node must be selected cautiously considering the fact that cash locked in master nodes approach they are now not available to end-users
Waggox is a digital asset system, killer of centralization with a strategic focus on worldwide growth and total acceptance by the people. To achieve this Waggox has chosen a high total coin supply of approx. Ninty eight million Waggox, as well as a highly available coin supply of approximately five hundred thousand Waggox currently in circulation, with more to mined. As the price per coin increases over time, in order to remain accessible, attractive and useful in emerging markets and be successfully adopted there, Waggox must sustain a high number of coins in circulation. In order to avoid unnecessary master nodes by locking up the coin supply, Waggox achieves this by setting proof of ownership for a master node at 1000 Waggox.

PRICE STABILISING EFFECT
Another major benefit of 1000 per master node size is the stabilizing effect it has on the coin price. Waggox’s highly attractive master node rewards structure makes buying the high number of coins needed attractive and worthwhile. Many master nodes will be formed by quick investors and enthusiastic supporters, each time removing 1000 coins from the market while increasing the value of the remaining coins. The high number of coins per master node implies a higher commitment level and with each master node being valued more, the turnover of master node ownerships remains relatively low as owners tend to stay invested over the longer term. The combined effect is the circulating coin supply, it’s growth rate and the value of each coin is to a certain degree stabilized, helping to create the price stability conditions needed for mass market adoption.

PROBLEMS
Mining of blockchain is carried out by dedicated miners who perform complex mathematical computations called “hashes”. Miners are rewarded for their work with a number of coins (depends on the coin emission factors). Hashes usually require a lot of time, energy(power) and resources to perform, and each hash has a similar chance as any other hash to find the block and win the blocks reward; A lot of hash power equals more chances to find blocks and their rewards. With the profitability of mining, a lot of people creates powerful computers and devices running specialized software to have a greater chance to win the block reward, in doing so earn more than the average miner. This problem has led to the what has become an arms race (take the case of Bitcoin mining). In bitcoin mining, big players who can afford to purchase millions of dollars worth of mining equipment, are really at an advantage compared to those that cannot purchase such. They easily find the block more and more, and as such the difficulty keep on going higher. This we make the smaller miners lose out of the game. Centralization comes into play and the unfair concentration of mining and it’s related rewards into the hands of the few. Powerful pools with higher power create problems and make centralization thereby remove decentralization from the people who cannot afford such hard end hardware. Dumping network is also created or happen in such instances because of the difficulty of getting rewards. As miners come in or out of a network, the total hash rate of that network varies. and when a network looks back over the last blocks to see how close to the ideal block time blocks were found, it adjusts a “difficulty” function up or down depending on whether blocks were found early (easily) or later than the intended block time. even when the mining pools have left the network, mining difficulty stays high and lowers with a certain (distorted) delay only when the network readjusts to the new much lower hash power remaining in the network. Drops in hash power can then leave the network unstable, impact transactions and even leave them hanging in the system. Advanced features like PrivatePay and InstaPay may also be affected. Mining pools dump sell their coins there may be an undesired effect on coin price stability, a key factor in the mass-adoption of a cryptocurrency.

SOLUTION
Waggox will moves to remove jump and dump mining from its network and better cope with hash power fluctuations, which ensure a smoother and fairer adjustment in mining difficulty. Smoothing is achieved by adjusting mining difficulty based on a moving average of time taken to find blocks over the last 24 hours, eliminating much of the effect caused by miners hopping onto and off of the network-based solely on when a coin is easiest to mine. In this way individual miners have a fairer share in the mining and related rewards, transactions are confirmed smoothly and transaction features like PrivatePay and InstaPay are highly performant. Fair mining code not only immediately benefits individual miners and the Waggox network but forms part of a greater strategic and technical enabling of upcoming features yet to be announced related to empowering “the average Joe”; a powerful component of our mass-adoption strategy

Ticker: WAGGOX
Coin supply: 98 million Waggox
Reward: 25
RPC Port: 27270
P2P Port: 28280
Masternode Reward: 5 Waggox
You need 1000 WAGGOX (1000 WAGGOX), a vps-server (Ubuntu 16) and an WAGGOX wallets to setup a masternode. My preferred VPS is VULTR

Website: WAGGOX
Source Code: WAGGOX SOURCE CODE
WAGGOX WALLET: WAGGOX UBUNTU WALLET
WAGGOX WALLET: WINDOW WALLET
EXPLORER: WAGGOX EXPLORER
Pool: WAGGOX Pool
Master Node Installation Guide MASTER NODE

Social Media:
  1. Twitter
  2. Discord
  3. Reddit
  4. Altcoin Announcement
  5. Bitcointalk
submitted by waggox to u/waggox [link] [comments]

[P2pool] How to make your own personal p2pool Node!

Tired of getting no block rewards and sending many dead shares? Need a p2pool node close to your miner? MAKE YOUR OWN! :D
And, Yep, P2pools give 0.5% Rewards to block finders!
Here's some info about p2ools: http://whatisp2pool.com/
The stronger the P2Pool network becomes the more resistant the digibyte network is to 51% attacks!
Oh and, P2pools are DDOS proof! Now that's News! So if your node gets DDOS'd .. you dont lose your shares as the shares have been saved in the p2pool, its called the sharechain. So you get paid anyhow! Thanks to the p2pool network. and you ccan set your workers to another pool using the "--failover only" command in cgminer (if im not wrong) and get it back to work on the p2pool network!
TL;DR; P2POOL = 1 Big fat network Decentrazlized pool!
STEPS TO MAKE A P2POOL:
Install Ubuntu server or Desktop if you want http://www.ubuntu.com/download/ or u can use a VPS (VirtualPrivateServer -- Link Below with coupon code)
So Let's start off in the command line (Open Terminal.. and all you have to do is Cut, Copy Paste! ;) )
Start by updating and upgrading Ubuntu, you know you want the best ;)
sudo apt-get update sudo apt-get upgrade sudo apt-get install python-software-properties sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update 
Time for the DigiByteProject dependencies!
sudo apt-get install build-essential libboost-all-dev libcurl4-openssl-dev libdb5.1-dev libdb5.1++-dev git qt-sdk libminiupnpc-dev sudo apt-get install qrencode libqrencode-dev 
And, Now to compile DigiByte on your system!
git clone git://github.com/digibyte/DigiByteProject.git digibyte #renaming makes it easier ;) cd ~/digibyte/src mkdir obj make -f makefile.unix USE_UPNP=- sudo cp digibyted /usbin cd ~ 
After it has compiled try running 'digibyted'
./digibyte/src/digibyted 
If you get an error saying you need to make the digibyte.conf file, good! :) If it doesnt give you that error, make sure you followed the compiling steps appropriately.
So, Lets create the conf file here...
cd .digibyte #edited from 'digibyted' .. fixed!! nano digibyte.conf 
Paste the following, CHANGING THE USERNAME AND PASS!! make sure to take note of both, you'll need these later!
rpcuser=CHANGEusername rpcpassword=ChangePassword daemon=1 server=1 rpcport=14022 port=12024 gen=1 rpcallowip=127.0.0.1 addnode=74.208.230.160 addnode=31.220.25.91 addnode=184.155.218.183 addnode=24.119.23.61 addnode=70.196.193.231 addnode=198.98.118.241 addnode=142.4.204.115 addnode=23.90.191.58 addnode=216.250.125.121 addnode=115.28.31.25 addnode=83.172.105.46 
Press 'CTRL' + ' X', and then 'Y' to save when prompted
cd ~ ./digibyte/src/digibyted ./digibyte/src/digibyted getinfo 
Make sure you check the latest block in the block chain or on your local DigiByte Wallets. This is to see how far your p2pool node has gotten! This is gonna take quite a while so lets CONTINUE!
Let's get the p2pool software and frontend in! Install the p2pool dependencies!
sudo apt-get install python-zope.interface python-twisted python-twisted-web git clone https://github.com/Rav3nPL/p2pool-rav p2pool #renaming it! cd ~/p2pool/digibyte_subsidy #Thanks to Chaeplin sudo python setup.py install 
Time to edit and customise the html code to personalise your p2pool's frontend. Feel free to change the p2pool name and if you're an advanced user, feel free to add your own frontend from git hub after removing the web-static folder. (OPTIONAL: by using rm -f -r web-static #in that directory. And then you can choose whichever frontend you want! by cloning it in the web-static folder)
Editing the current frontend html!
cd .. cd web-static nano index.html 
After personalising the page, i.e. changing the p2pool name and adding some info! Lets go back and check how far the block downloading has gotten! You can check this by typing this in the command line after going back to the root directory:
cd ~ ./digibyte/src/digibyted getinfo 
This is gonna take a while so might as well check for updates again :P
sudo apt-get update sudo apt-get upgrade 
After making sure that all the blocks have been synced locally! We're ready to run the p2pool node! Simply enter the string below in the command line, entering your USERNAME and PASS that you saved earlier!
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 
If you want to charge a fee for your node add this to your string, adding your fee address!:
--fee 1.0 --address NEWDGBADDRESS 
To see if the node is up and running enter this in the command line:
screen -x myp2pool 
'CTRL' + 'A' + 'D' to close the terminal if you press 'CTRL' + 'C', it will terminate the p2pool program and you'll have to restart the pool by using the string above!
Once, Everything is setup as planned! Check your p2pool node's ip Address by entering this into the command line:
ifconfig 
inet addr: 192.168.1.1 #You'll see a line like this.
So, Your cgminer string should look something like this:
cgminer --scrypt -o 192.168.1.1:9022 -u DGBADDRESS -p x
And your p2pool WEB ADDRESS should look like this:
192.168.1.1:9022
example: http://192.168.1.1:9022/
You can monitor your p2pool using that web address! Enjoy, your personal p2pool node!! :D
If for whatever reason the server shuts off and you need to restart the p2pool node, you should run digibyted again and after it has synced successfully, just type in your p2pool string:
./digibyte/src/digibyted
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 --fee 1.0 --address NEWADDRESS
PRESS CTRL + A + D to Detach from screen
UPDATE Follow Guide below if you used this guide before DigibByte v2.0 was released (28th Feb 2014)
You must check whether you're on the right ShareChain. Make Sure the block Value says 7960!
https://bitcointalk.org/index.php?topic=408268.msg5440858#msg5440858
This Tutorial was made with the help of an existing Guide: http://doges.org/index.php?topic=5586.0 Kudos to crypto49er!
If you want to do this on a VPS:
Here's a link to a VPS hosting site:
https://www.digitalocean.com/
Feel free to use my $10 ref. code -- it doesnt really make a difference, though.
https://www.digitalocean.com/?refcode=dc909c442664
Let me know if this guide helped!
submitted by StormMiner to Digibyte [link] [comments]

GUIMiner Installation and configuration How to install CCcam Server on Ubuntu server New - YouTube How to Install GUI on Ubuntu Server - Full Guide - YouTube Crypto Mining Pool Server Setup Vlog #3 How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS

This means, you only need a desktop computer and a Graphics card to start earning money today. Already a Zcash miner or new to mining, this is a complete guide for you to get started from buying the necessary hardware to setting up the software and calculating your profits. Important notes: Only testnet is currently available for Bitcoin Gold ... To install it open Ubuntu Software Centre and search for automake. The clue comes from ./autogen.sh: aclocal: not found The script autoget.sh (which is part of the miner) is trying to use the program aclocal which was not found. To find out which file belongs to what package use these commands in a terminal window (once only): A working install of Debian or Ubuntu 18.04 with root privileges. Conventions # - requires given linux command to be executed with root privileges either directly as a root user or by use of sudo command $ - given linux command to be executed as a regular non-privileged user; Introduction Ethereum has established itself as one of the big players in the cryptocurrency world. It's value has been ... Bitcoin Stock Dividends, France + Bitcoin, Countries Holding Bitcoin & IMF + Stablecoins; December 30, 2019 Should You Purchase A Bitmain Antminer S9 Bitcoin Miner In 2019 Or 2020? November 11, 2019 New Coinbase Coins, Microsoft + Ethereum, Bitcoin Vs Fiat, No One Uses BCASH Or SV; November 18, 2019 The LTS version of Ubuntu server, is the one we want to download. This is because the LTS version provides updates for about five years after the release date. We want the long term update version, since we will download drivers from their package repository. The non LTS versions only provide updates for nine months, meaning we would have to reinstall or update the OS every nine months ...

[index] [44237] [49976] [1932] [47179] [40495] [11805] [38881] [31847] [25074] [12288]

GUIMiner Installation and configuration

*ATTENTION* Nicehash has updated their program and the UI is very different from this video. I made an updated video so you can all follow along. Here is the... Another entry in the Crypto Mining Pool Server Vlog. Featuring re-purposed Dell Poweredge R720xd Google Search Appliances. Starwind: https://www.starwindsoft... How to install Ubuntu Server 18.04. This is basic bare bones installation of Ubuntu server 18.04. We also enable UFW and allow SSH through. This can also be ... In this video, I'm going to show you how to start mining Bitcoin on Linux/Debian based operating systems. https://bitcoinminingsoftware2019.com/bitcoin-minin... How to mining Bitcoin with your Ubuntu VPS? Earn 0.0001 BTC per VPS, if you have 10 VPS, you will earn 0.001 BTC per day (~2.5 USD), if you have a lot of VPS, you will earn more BTC per day. Setup ...

#